FULLY LOADED WITH FACTORY UPGRADES
- FULL CONTROL ON BOTH SIDES
- TANDEM BODY ON NEW CSR MODELS
- EXTRA LENGTH ON OUTRIGGERS
- COMPOSITE WINCH COVERS
- 2 AUXILIARY DP 20,000 LBS PLANETARY WINCHES 5/8” X 200’ WIRE ROPE
- 3/4” DYNEEMA 12-STRAND SYNTH. ROPES WITH SHACKLES
- 5/8” DYNEEMA 12-STRAND SYNTH. ROPES WITH SHACKLES
- SLIDING-DRAG WINCH – 50,000LBS (222KN) 3/4” X 360’ WIRE ROPE (MOUNTED ON THE MAST)
- 3/4” X 360 DYNEEMA 12-STRAND SYNTH. ROPES WITH SHACKLES
- ALUMINUM TUNNEL TOOL BOX
- ALUMINUM CHECKER PLATE ON TOP OF TUNNEL TOOL BOX
- COMPOSITE LIGHT PYLON
- TOOL BOX IEWTH DRAWERS WITH 2 ALUMNIUM SHELVES IN PASSENGER SIDE (RH) LARGE TOOL BOX
- AXLE-LIFT SHD – 4 STAGE SHORT – T-BAR 5X5
- CHAIN ADAPTORS
- SPRING BRACKET (5” WIDE)
- HIGH BACK AXLE FORK
- FIFTH WHEEL ATTACHMENT
- GOOSENECK ATTACHMENT
- KING PIN ATTACHMENT
- SHORT BACK AXLE FORK
- STEERTEK FORK NXT
- SHORT FORK
- TOW EYE BUS AXLE FORK
- STEP UP 8” FOR SWIVEL RECEIVER
- U BOLT ADAPTORS
- SPACKER KIT
- KETCHER HOOK
- SPREADER BAR
- LIFT TRIANGLE WITH CHOKER
- PINTLE HOOK BRACKET 4 HOLES ( 40 000LBS)
- WHELEN T-SERIES ION STROBE AMBER ON THE TOP CORNERS OF TRUCK GRID (2 TOTAL)
- WHELEN T-SERIES ION STROBE AMBER ON THE BOTTOM CORNERS OF TRUCK GRID (2 TOTAL)
- HYDRAULIC OIL HEATER – TANK ONLY
- EXTRA MARKER LIGHTS OPTION
- LUMABAR LIGHTING IN ALL TOOL BOXES
- UNIVERSAL LED FLASHER OUTLET ON ALL SIDE MARKER LIGHTS
- LUMABAR LIGHTS OUTSIDE TUNNEL TOOL BOX
- PERIMETER ENHANCEMENT LIGHT, SUPER-LED, STEADY WHITE (2 TOTAL)
- PERIMETER ENHANCEMENT LIGHT, SUPER-LED, STEADY WHITE (4 TOTAL)
- STROBES AMBER IN REAR TAIL LIGHTS (ONE ON EACH SIDE)
- WORK LIGHT ON EACH SIDE OF THE AXLE-LIFT
- EXTRA MARKER LIGHTS ON THE SIDE OF LIGHT PYLON
- 2 FLEXIBLE LIGHT POSITION ON EACH SIDE OD THE SIDE COMPOSITE
- STAINLESS UNDERNEATH MARKET LIGHTS
- 48” WIRELESS ROUND STROBE TOW LIGHT WITH BRACKET AND CHARGER
- YELLOW MAXI LINER 8 W/COLOR DISPLAY SCANERCO
- 2 LED WORK LIGHTS ON THE CYLINDRE ATTACHMENT
- 2 LED WORK LIGHTS UNDER THE AUX WINCH SHEAVES
- WIRELESS REMOTE CONTROL LODAR 6 BUTTONS
- STABILIZED GRIPS FOR OUTRIGGER FOR SIDE PULLING
- DOUBLE SPREADER BAR HOLDER
- AIR HOSE REEL INSTALLED ON TOP OF THE BODY
- MADISSON GRIPS SET FOR CSR OUTRIGGER
- WINCH CAMERA WITH SCREEN
- SCANRECO LO-CATOR & IP TRANSMITTERS WITH LED AND BUZZER
- LUBE ELECTRIC GREASE PUMP ON THE SLIDE CSR
- FASTER HYD CONNECTOR
- GUIDE IDLERS OVER TAILBOARD POCKETS
- EXTRA ELECTRICAL OUTPUT FOR BODY W/ AUTO SLIDE GREASE
- HARNESS FOR EXTRA STROBES
- BACK-UP CAMERA WITH SCREEN
- LODAR LO-CATOR FOR STANDARD & IP TRANSMITTERS WITH LED AND BUZZER
- TAG-AXLE WITH FASTER CONNECTOR
- STAINLESS PACKAGE ON TAG- AXLE
- CHROME BEZELS ON ALL TAIL LIGHT FOR QS;
- 2 UNITS SLIM LIGHTBAR ALLEGIANT 21” FEDSIG ON THE TOP OF CABLE GUIDE
- IVER TOOLS BASE KIT
- FREIGHTLINER CASCADIA - IVER TOOLS
- VOLVO VNL - IVER TOOLS
- KENWORTH / PETERBILT - IVER TOOLS
- RECOVERY KIT; IVER TOOL
- 46MM WRENCH; IVER TOOL
- SLIM LIGHTBAR 911” CODE 3
.
